Guide to imyPass iPassGo

Getting Started

Download & Install

Download the software on your Windows PC or Mac and launch it once it is installed.

Register

If you have purchased iPassGo, imyPass will email the registration code to you. You just need to input the email address and copy the code to a certain box in the Registration window. Then, you can register the software successfully and enjoy its full features.

Update Software

To update imyPass iPassGo, you can go to Menu at the top of the interface and click Check Update…, then it will detect if the current version is the latest. If not, it will let you update it. Or you can go to imyPass official website to download the newest version.

imyPass Support

imyPass provides you with technical support via an online help guide. You can also contact our support team via [email protected].

Unlock iPhone Screen Passcode

Step 1 Connect iOS device to Computer

Launch imyPass iPassGo on your computer, then choose the Wipe Passcode mode from the interface.

Connect your device to computer with a USB cable. To get started, click the Start button to proceed.

Reminder:

1. All Data will be erased once the passcode is removed.

2. Your iOS version will be updated to the newest one.

3. If you fail to connect the device to computer, you can click “Device connected but not recognized?” to help you fix this issue.

Step 2 Download Firmware Package

Next, confirm your device information before unlocking and click Start to begin downloading the firmware package from the network. Make sure that your network connection works well. It just takes a few minutes to download and verify the firmware package.

Step 3 Unlock iPhone Passcode

After downloading, hit on the Unlock button to continue. You need to read the notification carefully and confirm the unlocking process again. If you agree to remove the passcode from your device, enter 0000 to ensure the process. Wait for a while, and the passcode will automatically be removed from your device.

Remove Apple ID without Passcode

Step 1 Connect iOS device to Computer

Launch imyPass iPassGo on your computer, then choose the Remove Apple ID mode from the interface.

Connect your device to computer with a USB cable. To get started, click the Start button to proceed.

Reminder:

1. Remove Apple ID will wipe all your data.

2. You need to keep your device connected to computer while unlocking.

Step 2 Remove Apple ID

If Find My iPhone is turned off, imyPass iPassGo can unlock Apple ID immediately.

1. For iOS devices running on iOS 11.3 or earlier:

You’ll need to reset all settings on your device. To reset all settings, go to Settings, choose General, then tap Reset All Settings. After that, imyPass iPassGo can start removing Apple ID instantly.

2. For iOS devices running on iOS 11.4 or later:

You’ll need to confirm if Two-Factor Authentication is enabled. To turn it on, go to Settings, Apple ID, then Password & Security to turn on Two-Factor Authentication. When all has settled, enter 0000 to re-confirm the unlocking. Now, a new window lets you confirm your device information before unlocking. If there is no problem, hit the Start button to start removing Apple ID.

When the process is over, the current Apple ID won’t be registered on the device. So, you can set up your device with a new Apple ID.

Bypass Screen Time Passcode

Step 1 Connect iOS device to Computer

Launch imyPass iPassGo on your computer, then choose the Screen Time mode from the interface.

Connect your device to computer with a USB cable. To get started, click the Start button to proceed.

Reminder:

1. Make sure that Find My iPhone is disabled. To turn it off, open Settings, tap your name, tap Find My, and Find My [device], and disable it.

2. Make sure that the version of iTunes is the newest.

3. Do not disconnect your device during the whole process.

Step 2 Remove Screen Time Passcode

If your device runs on iOS 12 or later, imyPass iPassGo can unlock the Screen Time passcode at once. You’ll need to perform the device setup settings when the process is complete. When you see the Apps & Data page on your device, select Don’t Transfer Apps & Data to avoid data loss. To ensure that the Screen Time passcode is removed completely, choose Set Up Later in Settings when you come across the Screen Time page.

If your device runs on iOS 11 or earlier, imyPass iPassGo can retrieve the Restrictions passcode immediately only when your iTunes backup is not encrypted. If the iTunes backup has been encrypted, you need to input the passcode to decrypt the backup first. After that, your device will enter the retrieving process. It will take a while, and please wait patiently. Once the process is complete, the program will present the current Restrictions passcode. You can use it to rest the Restrictions passcode.

Remove MDM

Step 1 Connect iOS device to Computer

Launch imPass iPassGo on your computer, then choose the Remove MDM mode from the interface.

Connect your device to the computer with a USB cable. To get started, click the Start button to proceed.

Reminder:

1. The content or settings will not be erased while removing MDM from your device.

2. Your device will restart after the process of removing it.

Step 2 Remove Screen Time Passcode

After pressing Start, this software will automatically remove MDM from your device. Please ensure your device and computer maintain a stable connection during this process.

Once this process is complete, your iPhone will automatically restart. After that, it will not be controlled by MDM anymore. However, if you empty your iPhone’s content and settings, MDM will reappear.

Remove iTunes Backup Password

Step 1 Connect iOS device to Computer

Launch imPass iPassGo on your computer, then choose the Remove iTunes Backup Password mode from the interface.

Connect your device to the computer with a USB cable. To get started, click the Start button to proceed.

Reminder:

1. Ensure that Find My iPhone is turned off. To do this, you can come to Settings, tap your name > Find My > Find My device, then turn it off.

2. Do not open iTunes during the process.

3. Your iPhone will restart during the removal process.

Step 2 Remove iTunes Backup Encryption Settings

Once you’ve clicked Start, your iTunes backup password will be removed in seconds. Now you can backup, restore, transfer, or erase your device without hassle.